CBMTQ - 141 INK

  • MSDS: CBMTQ
  • Manufacturer: SPECIALTY INK CO INC
  • Product Name: 141 INK
  • National Stock Number: 7510-00N070890
Product Identification

Product ID:141 INK
MSDS Date:06/01/1994
FSC:7510
NIIN:00N070890
MSDS Number: CBMTQ

Responsible Party
SPECIALTY INK CO INC
20 DUNTON AVE
DEER PARK, NY 11729
US

Emergency Phone: 516-586-3666

Info Phone: 516-586-3666

Preparer: ALLEN WERWA

Cage: 18092

Contractor
SPECIALTY INK CO INC
R DEER PARK, NY 11729 US

Telephone: 516-586-3666

Cage: 18092

Ingredients

ETHANOL, 2-PHENOXY-; (PHENYL GLYCOL ETHER)

CAS: 122-99-6

RTECS: KM0350000

Fraction By Weight: 1%

OSHA PEL 5 PPM (MFR)

ACGIH TLV: 5 PPM (MFR)


ETHYL ALCOHOL; (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 25%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM


ETHANOL, 2-(2-METHOXYETHOXY)-; (METHYL CARBITOL)

CAS: 111-77-3

RTECS: KL6125000

Fraction By Weight: 48%

OSHA PEL N/K

ACGIH TLV: N/K


45.75 G/L.

RTECS: 9999999VO

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN & EYE IRRITANT; DIZZINESS.
HEADACHE, NAUSEA, VOMITING. IRRITATION TO EYES, NOSE & THROAT.
NARCOSIS IF SWALLOWED. WEAKNESS. CHRONIC:NONE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN & RESPIRATORY
DISORDERS.

First Aid

First Aid:INHALATION:REMOVE TO FRESH AIR IF OVERCOME BY VAPOR.
EYES:IRRIGATE W/CLEAN WATER FOR AT LEAST 15 MINUTES. SKIN:WASH
W/SOAP & WATER; CHANGE CLOTHING. INGEST:GIVE TWO GLASSES OF
LUKEWARM WATER. INDUCE V OMITING; CALL MD.

Fire Fighting

Flash Point Method:CC
Flash Point:118F,48C
Lower Limits:1.5%
Upper Limits:9.5%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL RESISTANT
FOAM, UNIVERSAL FOAM, WATERSPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . USE WATERSPRAY TO COOL FIRE-EXPOSED AREA. USE
WATERSPRAY TO PROTECT PERSONNEL.
Unusual Fire/Explosion Hazard:WEAR FACE SHIELD TO PROTECT FACE & EYES
FROM CONTACT W/LIQUID OR VAPOR.

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF IGNITION; VENTILATE. CONTAIN
& COVER SPILL W/ABSORBENT. COLLECT & PUT IN A CHEMICAL WASTE DRUM.
DO NOT ALLOW SPILL TO ENTER WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
USE ONLY W/ADEQUATE VENTILATION. KEEP AWAY FROM HEAT & FLAME. DO
NOT GET IN EYES OR TAKE INTERNALLY.
Other Precautions:AVOID PRLNG BRTHG OF VAPS. AVOID CONT W/EYES. AVOID
RPTD/PRLNG SKIN CONT. HAZS LISTED ON THIS MSDS ARE TAKEN FROM MSDS
FOR EACH OF INGS IN THIS MIXT. IN MOST CASES, MAX FORM OF HAZ IS
REPRESENTED HERE . TLV'S REPRESENT CNDTNS UNDER (SUPDAT)

Exposure Controls

Respiratory Protection:GENERAL ROOM VENTILATION IS SATISFACTORY.
NIOSH/MSHA APPROVED RESPIRATOR WHEN NECESSARY.
Ventilation:PROVIDE ADEQUATE CROSS AIR VENTILATION. LOCAL EXHAUST:
PREFERABLE. MECHANICAL: ACCEPTABLE.
Protective Gloves:CHEMICAL IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:PRACTICE REASONABLE CARE & CAUTION WHEN USING
INK.
Supplemental Safety and Health
OTHER PREC:WHICH IS IT BELIEVED THAT NEARLY ALL WORKERS MAY BE RPTDLY
EXPOS DAY AFTER DAY W/OUT ADVERSE EFT. IT MUST BE REMEMBERED THAT
EACH INDIVIDUAL REACTS DIFFERENTLY & SOME MAY EXPER DISCOMFORT W
HILE OTHERS DO NOT. THIS MSDS IS PRESENTED SO THAT EACH INDIVIDUAL
WILL HAVE INFO TO DEAL SAFELY W/USE OF THIS PROD.

Chemical Properties

Boiling Pt:B.P. Text:381F,194C
Melt/Freeze Pt:M.P/F.P Text:-12F,-24C
Vapor Pres:0.1
Vapor Density:4.14
Spec Gravity:1.023
Solubility in Water:SLIGHT
Appearance and Odor:MOBILE LIQUID; MILD ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS & OPEN FLAME.
Hazardous Decomposition Products:BURNING WILL PRODUCE CO*2 &/OR CO.

Disposal

Waste Disposal Methods:INCINERATE IN CHEMICAL FURNACE. MUST CONFORM TO
LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.